This site uses cookies to simplify and improve your usage and experience of this website. Cookies are small text files stored on the device you are using to access this website. If you ignore this message and continue without changing your browser settings, we will assume that you are consenting to our use of cookies. For further information on our use of cookies, please see our Privacy Statement.

Select GTX turbochargers come standard witha fully machined speed sensor port. Just remove the bolt and screw in the appropriate kit for your applicaiton. GT/GTX speed sensor kit not applicable with G Series turbochargers.

Speed Sensor Kit
G Series Speed Sensor

Speed Sensor

Speed Sensor Street Kit: GT/GTX Models Part Number: 781328-0001
Speed Sensor Pro: GT/GTX Models Part Number: 781328-0002
Speed Sensor Street Kit: G Series Models Part Number: 78138-0003
Speed Sensor Pro: G Series Models Part Number: 781328-0004
Maximum Performance

Comparing boost levels and shaft speed on a compressor map, you can determine the ideal operating conditions to insure peak power over a wider operating range. All Honeywell Garrett® Turbocharger Speed Sensor Kits are compatible with dataloggers to enhance engine tuning capability. In addition, the Honeywell Garrett®-branded gauge's maximum speed recall function will retain the highest wheel speed for five minutes for easy mapping. The data gained from the Honeywell Garrett® Turbocharger Speed Sensor Kit can be used to closely estimate the engine's flow behavior without a flow bench. Flow information is invaluable for determining if the turbocharger is reaching its maximum performance, for validating the turbo match, and for insuring that it is not overspeeding, allowing you to avoid potentially damaging operating conditions. This kit could even be used in conjunction with an aftermarket ECU to limit compressor speed. The Honeywell Garrett® Turbocharger Speed Sensor Kit will help you be sure you've got the correct turbo for your needs!

Easy To Use

The Honeywell Garrett® Turbocharger Speed Sensor works with any turbocharger to accurately determine compressor wheel speed. The instructions include detailed drawings of the exact machining specifications for all Honeywell Garrett® GT catalog turbochargers as well as general guidelines for other compressor housing types. The Honeywell Garrett® Turbocharger Speed Sensor Kit includes all necessary wiring for easy installation and simple data logging.

Garrett Gauge

Boost Gauge

Boost Gauge PSI Part Number: 773326-0001
Boost Gauge BAR Part Number: 773326-0002

The Honeywell Garrett Mechanical Boost Gauge is the perfect addition to your interior for the important job of accurately monitoring your boost levels. The gauge has a sleek design and features a black face, white backlit numbers and a brushed aluminum ring. The gauge monitors boost from 30 Hg of vacuum to 30 psi of boost. Gauge kit comes with vacuum line, hardware, mounting brace and installation instructions.

Adjustable Bracket
Adjustable Bracket

Adjustable Wastegate Bracket

Part Number: 773151-0002

Turbine Inlet Divided V-Band Adapter

Part Number: 813444-0001

The Garrett Adjustable Wastegate Bracket allows for a significantly greater range of motion to set up the compressor outlet and wastegate can. This provides easier fitment in tight engine bays by giving you the ability to make smaller adjustments to compressor housing clocking than would be possible through the standard bolt adjustments which adjust the compressor outlet at 60* increments on GT25R and GT28R turbochargers. The bracket also allows for redirection of the actuator to keep vacuum lines away from heat or sharp edges. The adjustable actuator bracket is available for use on GT25R, GT28R and GT30R turbochargers.

Accessory Kits Accessory PN
Boost Gauge PSI 773326-0001
Boost Gauge BAR 773326-0002
Speed Sensor Street Kit: G Series Models 781328-0003
Speed Sensor Pro: G Series Models 781328-0004
Speed Sensor Street Kit GT/GTX Models 781328-0001
Speed Sensor Pro GT/GTX Models 781328-0002
3.0" Turbine V-Band Flange Adapter GT/GTX 30-35 774175-0001
Turbine Inlet Div V-Band Flange Adapter 813444-0001
Adjustable Actuator Bracket GT25, GT28, GT30 773151-0002
Heat Shield Kit Turbine Hsg GT28/28 785928-0001
Downloadable Instructions Download View
Garrett Turbocharger Speed Sensor Installation InstructionsClick HereClick Here
Garrett Turbocharger Machining Drawings (Print to 11 x 17 paper)Click HereClick Here
Speed Sensor Kit Installation InstructionsClick HereClick Here
Actuators Assembly: Actuator PN Models
NOT INCLUDED: Rod End, jam nut, bracket, heat shield
Acturator, Adj (1.0 bar) 480009-0006 GT25
Acturator, Adj (0.5 bar) 480009-0009 GT25
Acturator, Adj (1.5 bar) 480009-0010 GT25
Actuators Assembly Kit: Actuator PN Models
COMPLETE with actuator, bracket, rod End, jam nut, heat shield
Actuator Kit (T25) 700187-0001 T25
Acturator Kit, Adj (12.0 PSI) 759498-0004 GT35R
Acturator Kit, Adj (16.7 PSI) 759498-0007 GT25
G Series Standard Turbo 1.0 Bar 759498-0008 G Series
G Series Standard Turbo 1.5 Bar 759498-0010 G Series
G Series Reverse Turbo 1.0 Bar 759498-0011 G Series
G Series Reverse Turbo 1.5 Bar 759498-0013 G Series
  Link to this page: